Extend The Life Of Your Machine Just Do These Steps!

1. Replacement of circulating water and tank cleaning

Make sure that the laser tube is filled with circulating water before the machine works. The quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, it is necessary to regularly replace the circulating water and clean the water tank.

2. Fan cleaning

The long-term use of the fan in the machine will cause a lot of solid dust to accumulate in the fan, which will make the fan generate a lot of noise, and is not conducive to exhaust and odor removal. When the suction of the fan is insufficient and the smoke exhaust is not smooth, it is necessary to clean the fan.

3. Lens cleaning

There will be collimating mirrors and focusing mirrors on the machine. The laser is emitted from the laser head through these lenses. The lens is easily stained with dust or other contaminants, resulting in loss of laser light or damage to the lens. So clean the lenses every day. When cleaning, pay attention to: 1. The lens should be wiped gently to avoid damaging the surface coating; 2. The wiping process should be handled with care to prevent it from falling; 3. Please keep the concave side down when installing the focusing lens.

4. Cleaning of the rails

As one of the core components of the equipment, the guide rail and the linear axis mainly play the role of guiding and supporting. In order to ensure the high machining accuracy of the machine, its guide rails and straight lines are required to have high guiding accuracy and good motion stability. During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece, and these smoke and dust will be deposited on the surface of the guide rail and the linear axis for a long time, which has a great impact on the processing accuracy of the equipment, and will Corrosion spots are formed on the surface of the linear shaft of the guide rail, which shortens the service life of the equipment. Therefore, clean the machine guide rails every two weeks. Turn off the machine before cleaning.

5. Tightening of screws and couplings

After the motion system works for a period of time, the screws and couplings at the motion joints will be loose, which will affect the stability of the mechanical movement. Therefore, during the operation of the machine, it is necessary to observe whether there is abnormal noise or abnormal phenomenon in the transmission parts, and find problems in time. Sturdy and maintained. At the same time, the machine should tighten the screws one by one with a tool over a period of time. The first firming should be about a month after the device is used.

6. Inspection of the light path

The optical path system of the machine is completed by the double focusing of the collimating lens and the focusing lens. In the optical path, the focusing lens has no offset problem, but the collimating lens is fixed by the mechanical part, and the possibility of offset is high, although usually There will be no offset in the case, but it is recommended that the user must check whether the optical path is normal before each work.

1. Check the lubrication oil filling of X-axis guide rail and screw, Y-axis guide and screw, Z-axis guide and screw every other week, keep all moving parts lubricated, and extend X, Y, Z-axis guide and screw. life of the lever.

2. Check the contamination on the surface of the collimating mirror and the focusing mirror from time to time depending on the environment of the workshop, and clean the optical lens in time to ensure its service life.

3. Regularly clean up the debris over the air outlet to ensure the ventilation effect.

4. Regularly check the filter in the air circuit, and remove the accumulated water and debris in the filter in time.

5. Regularly check whether the screws of the travel switch bracket and the striker bracket are loose.

6. Clean up the dust on the filter net of the ventilation fan of the electric control cabinet in time to ensure good ventilation, so as to facilitate the heat dissipation of the internal electrical components.

7. When the bed is arranged, the debris in the protective leather cavity of the guide rail should be cleaned in time to avoid damage to the guide rail, thereby prolonging the service life of the guide rail.

8. After the machine tool is installed and used for a period of time, the level of the machine tool should be readjusted to ensure the cutting accuracy of the machine tool.