How To Use Laser Cutting Machine

As a high-tech product, the laser cutting machine is widely used in the industry. The processing of the whole machinery industry needs the laser cutting machine. Therefore, for such a widely used equipment, how to operate safely has become the concern of the public. GoodCut laser will share the usage of laser cutting machine for you.

GoodCut teaches you how to operate the laser cutting machine correctly

1. Follow the instructions of laser cutting machine and start the equipment strictly according to the above procedure.

2. The personnel operating the equipment must be trained by the laser cutting machine manufacturer before taking up the post.

3. When processing materials, you must wear necessary protective equipment, such as protective glasses.

4. Laser irradiation and processing are not allowed until the processing material is clear.

5. After the laser cutting machine is started, there must be full-time personnel on site to prevent unauthorized leaving. If it is necessary to leave, the equipment should be shut down.

6. In the vicinity of laser cutting machine processing, there should be portable fire extinguisher and other equipment.

7. In the process of processing, if abnormal conditions are found, the machine should be shut down immediately, and then special personnel should be found for detection.

8. After the use of laser cutting machine equipment, must be timely clean, for the next processing to make adequate preparation.

9. Inspect laser tube, auxiliary gas and other consumables on time. Make sure it's enough

10. When the laser cutting machine is working, we should pay attention to observe whether there is any abnormality in every detail of the machine tool.

According to the actual situation of the workpiece to be processed, the laser cutting machine selects open machining or closed processing, and shortens the distance between nozzle and workpiece as far as possible under the condition of avoiding interference.

Check whether the feeding speed of electrode wire is appropriate. When cutting taper, the tension should be reduced to half of the normal value.

In the process of laser cutting machine processing, it is necessary to check and monitor the cutting condition, and deal with the problem immediately.

When programming, it is necessary to determine the accurate processing technology and processing route according to the actual situation, so as to prevent the workpiece scrapping or blocking and falling in advance due to insufficient processing position or insufficient edge strength.

The laser cutting machine should pay attention to observe and judge the processing is not disorderly, and timely adjust when the defects are found.

Check whether the tension of electrode wire is enough. Before line cutting, it is necessary to confirm whether the program and compensation are accurate. When moving the worktable or spindle, it is necessary to accurately select the moving speed according to the distance between the worktable and the workpiece, so as to avoid collision when moving too fast.

Check whether the jet selection is reasonable, use high-pressure jet for rough machining and low-pressure jet for finishing. The distance between the nozzle and the workpiece is generally 0.05-0.1mm.

Production safety is a must for every enterprise. The correct operation of the laser cutting machine is no exception. Only by mastering the normal use of the laser cutting machine can we create more value for the enterprise. For the above part of the safe operation of the laser cutting machine, please refer to the operation manual of the laser cutting machine for details. Do a good job in safe operation, can reduce unnecessary losses to enterprises.